I got an issue with a concrete vault

[ammer]

dear Mr. Hakan and all members;
the below attaches for the concrete vault"tnoze",even after the addition of the vault, the axial loads for columns did not increase.
please solve this issue and get me your tips.
with my great respects..

Bu linki görmek için izniniz yok. Giriş yap veya üye ol.

Bu linki görmek için izniniz yok. Giriş yap veya üye ol.

 

[Hakan Şahin]

dear Mr. Hakan and all members;
the below attaches for the concrete vault"tnoze",even after the addition of the vault, the axial loads for columns did not increase.
please solve this issue and get me your tips.
with my great respects..

Hi ammer,

You should set vault edges for building-vault together analysis. To do that, click vault on toolbar and click "set vault restraints". Click vault edges, choose "boundary conditions for solution with building system" and set restraints. See the picture below



Do the same for opposite edge.

now, go Analysis Settings, click "semi diaphragms" on General Tab and close dialog.



After analysis , you are going to see analysis results as you expect..

 

[ammer]

many thanks dear hakan,i have a version 8.503 english,dose it works?

 

[Hakan Şahin]

many thanks dear hakan,i have a version 8.503 english,dose it works?

I was thinking you are using 8.103 which it doesn't work. It works on 8.503 but 8.504 is our last version we released

 

[ammer]

very good mr hakan
one more question,do this an english version ?

 

[Hakan Şahin]

very good mr hakan
one more question,do this an english version ?

yes it is